Knowledge is Power!

The Roofing Breakdown or what we call a Roofing Analysis is a comprehensive and detailed report that is accomplished using proprietary software that was years in the making. Do-It-Yourselfers, architects, general contractors and yes, even roofing contractors use our Roofing Analysis to get accurate details on what it’s going to take to complete a job.

Let’s Take a Look at What You’ll Have at Your Fingertips!

1) The Cut List

This is a summary of all the materials you’ll need for your project.  It includes the number of panels (every length needed), trim and their respective quantities right down to the number of fasteners. Precise could be a good adjective for this report—it even calculates the percentage of waste on each particular panel that you will have to cut based upon angles at valleys etc.!
Cool, huh?

The Cut List
The Cut List
Click to open large Adobe .PDF version

2) Panel Layout

Nothing is worse than looking at a bundle of panels and wondering which goes where.  Not with Absolute Steel! Each bundle is clearly marked showing what’s in it and with the Panel Layout you’ll know exactly where each panel goes.   Don’t guess—KNOW. Especially when you’re on the job and time is money. Besides, using Absolute Steel and the Panel Layout will save you from dragging panels around and scratching them up…we hate touchup paint as much as you do!

Panel Layout Plans
The Panel Layout Plans
Click to open large Adobe .PDF version

3) 3-D Roof Layout

Not particularly useful but darn fun to see what your roof in going to look like with a new roof from Absolute Steel on it!

Three Dimensional Roof Layout
Three Dimensional Roof Layout
Click to open large Adobe .PDF version

4) Roof Quote

Every item you’ll need is listed out along with the quantities and prices…right down to the trim pieces and screws.

Complete Roofing Materials Quote
The Roofing Quote
Click to open large Adobe .PDF version

And for When the World Comes Up to Our Standards!

Our Roofing Analysis even contains the exact cuts required for each panel as well! When we say exact cuts, we mean the angles, lengths—everything! One day, perhaps in the not too distant future, when metal roofing manufacturers implement our software (catch up to us) into their roll formers, your metal roofing will roll out of the machines and be cut with the exact angles in each and every length you need for the job!

Seen Enough?

Call Us:  877-833-3237


Contact Us

Have a question? Send us an email and we'll get back to you, asap. Just need pricing info? Try this: Online pricing tool

Not readable? Change text.