metal roofing metal shingles Roofing Installation metalroofingsource

bullet Home
bullet Get an Estimate

About Metal Roofing:
Benefits of Metal Roofing
bullet FAQs
bullet Glossary of Terms

Metal Roofing Products:
bullet Metal Roofing Styles
bullet Vertical Panels
bullet Metal Shingles
bullet Roofing Underlayment

Testimonials:
bullet Customer Testimonials
bullet Customer Gallery

Installation:
bullet DIY Installation
bullet DIY Most FAQs
bullet Tools You Will Need
bullet Professional Installation
bullet Selecting a Contractor

Roofing Materials Costs:
bullet Measuring Your Roof
bullet Determining Roof Pitch
bullet Get the Estimate

Roofing Analysis:
bullet About the Analysis
bullet The Key to Saving Money
bullet Testimonials
bullet Before the Analysis
bullet Get Your Analysis

About Us:
bullet Our Low Prices
bullet About Absolute Steel
bullet Shipping
bullet Policies
bullet Contact Us

PRO-MASTER ROOF SHIELD UDL™ TECHNICAL SPECIFICATIONS:**
Meets or exceeds applicable National Building Code Requirements for AC48, AC188, and ASTM D226 Type II

Roll Dimensions:
PMUDL10: 1000 Sq. Ft. Roll
Width: 52 in. Length: 231 ft. Weight: 28 lbs.
Material:
Woven black polyproylene with polymer and anti-slip coating
Weight:
3.83 ounces per square yard
Slip Resistance:
Test Standard CGSB 75.1
Rubber Shoe slip resistance exceeded standard by 37% dry and 46% when wet.
UV Resistance:
Material is UV stabilized and will withstand 1 year exposure
Strip Tensile Strength:
Per ISO 13934-1
MD: 123 lbs.
CD: 68 lbs.
Per AC48
Strip Elongation:
MD: 16%
CD: 12%
Grab Tensile Strength:
ASTM D4632
MD: 180 lbs.
CD: 115 lbs.
Grab Elongation:
ASTM D4632
MD: 17%
CD: 13%
Nail Tear Resistance:
Per EN 12310-1
MD: 90 lbs.
CD: 54 lbs.
Nail Sealability:
Pass
Pliability:
Pass
Water Ponding:
Pass
Water Vapor Permeance:
Pass .05 perms
Beach Puncture Test:
Pass Per Tappi T803 om_79
Tensile after 21 Day UV Aging:
AC48
MD: 120 lbs.
CD: 70 lbs.
Tensile after 25 Day
Accelerated Aging:
AC48
MD: 117 lbs.
CD: 70 lbs.
Fire Classification:
ASTM E108
Class A
*Nominal weight.
**Results based on independent testing of randomly selected rolls. Variations will occur due to manufacturing and process tolerance.


PRO-MASTER ROOF SHIELD UDL™ MATERIAL SAFETY DATA SHEET:

1. PRODUCT IDENTIFICATION AND USE:

Product identification: Pro-Master Roof Shield UDL™
Product use/description: coated woven polypropylene for use as a roofing underlayment
Product composition: Polypropylene and polymer blend

2. HAZARDOUS INGREDIENTS:

This is not a hazardous product as defined by WHMIS

3. PHYSICAL DATA:

Physical state: Solid
Odor and appearance: Pigmented odorless woven fabric
Odor threshold (ppm): N/Ap
Vapor pressure (mmHg): N/Ap
Vapor density: (Air = 1): N/Ap
Evaporation rate: N/Ap
Boiling point (°F): N/Ap
Freezing point (°F): N/Ap
PH: N/Ap
Specific gravity: N/Ap
Coef. Water/oil dist: N/Ap

4. FIRE AND EXPLOSION DATA:

Flammability: Not flammable, but in case of fire it will contribute
Means of extinction: Water spray and dry chemicals
Flash point (°F) and Method: N/Ap
Upper flammable limit and Lower flammable limit (% by volume): N/Ap
Hazardous combustion products: Carbon Monoxide, carbon dioxide,
nitrogen oxides
Explosion data: Not sensitive to impact or static discharge

5. REACTIVITY DATA:

Chemical stability: Yes
Incompatibility with other substances: None
Reactivity: Non-reactive
Hazardous decomposition products: No data

6. TOXICOLOGICAL PROPERTIES:

Route of entry: N/Ap
Effects of acute exposure to product: None known
Effects of chronic exposure to product: None known
Exposure limits: Not available
Irritancy of product: N/Ap
Carcinogenicity: Not on IARC list
Synergistic products: None known

7. PREVENTIVE MEASURES:

Special shipping information: None
No respirator required under normal use
Leak and spill procedure: N/ap
Storage requirements: N/Ap
Waste disposal: See local authorities for disposal instructions
Gloves: N/Ap
Handling and storage: Rolls should be adequately restrained to prevent
shifting

8. FIRST AID MEASURES: N/AP

9. OTHER INFORMATION:

DOT shipping name and classification: Not Available

DISCLAIMER:
Hazardous data contained supplied herein was furnished by raw material suppliers. The information presented is believed to be factual and derived from qualified sources. However, no facts contained in the
information are to be taken as a warranty expressed or implied. The data on this sheet relates only to the specific material designated herein. Berger assumes no legal responsibility for use or reliance upon
this data.
*N/Ap = Not applicable
IARC = International Agency for Research on Cancer
WHMIS = Workplace Hazardous Materials Information System


More Information:

 


WE NOW OFFER FINANCING!

No payments and no interest for 6 months!

Toll Free: 877-833-3237
Local: 480-768-1618
Fax: 480-768-1514 

© 2008 MetalRoofingSource.com

Arizona Web Site Developers