|
Roofing estimates require a little information
from you. But we are here to help.
There’s a few measurements that are required to get
an instant roofing estimate,
but it’s nothing too complicated. Let’s
get started!
Your roofing estimate will need two
things from you:
1. The total square
feet of your roof, including overhangs. Remember, overhangs
are the amount your roof extends past the exterior walls of
your home. We’re also talking about the total amount
“under roof” not just the livable square footage
of your home. This would include patios, garages, etc.
2. The pitch or
slope of your roof.
It’s easy. There are two ways
to get this information:
House Plans:
Your original house plans most likely have all the information
you’ll need. The roof plan will be the only sheet you’ll
need to take a look at. Note: Sometimes it’s
a good idea to obtain the answers by the Do-It-Yourself method
(below) as occasionally contractors make “field modifications”
to the architect’s plans.
Do-It-Yourself:
To figure out the total square footage of the building, see
the section Measuring a Roof.
To figure out what the Pitch (or slope) of your roof is, see
the section Determining the Roof
Pitch.
If you already have this information, then you’re
ready to get your materials
quote.
Get
an estimate now.
Or...
you can call us toll-free for a quote.
TOLL FREE: 877-833-3237
A Roofing Analysis is The Key to
Saving Money! Knowledge is Power! The Roofing Analysis answers
questions you didn't even know you had! Talk about powerful.
The purchase of your metal roofing materials
from Absolute Steel includes our Roofing Analysis at no extra
charge. The Roofing Analysis is a comprehensive and detailed
report that is accomplished using proprietary software that
was years in the making. Homeowners building or re-roofing
their residences, architects, builders, general contractors
and yes, even roofing contractors, use our reports.
An Absolute Steel Roofing Analysis is
the industry standard. It will furnish you answers to questions
you didn’t even know to ask! Plainly said, you’re
in the driver’s seat.
- Know what the labor should cost
- Know when someone is pulling your leg about
the installation hours
- Negotiate better pricing if using a contractor
- Panel placement - save time with illustrations
showing material placement
- Save material with accurate cuts
- Trim & flashing plan - saves time &
money
- Purlin plan - includes placement & quantities
if purlins will be used
- Free with your material purchase (the cost
is credited to you)!
- Roofing Analysis Sample!
- See what
others have to say about the Analysis
- Order your Analysis
Now!
|
